Terms and Conditions
Terms and conditions of sale
1. Definitions
1.1 " The Company " means Stairplan Limited
1.2 "The Conditions" means the standard terms of sale set out
in this document and (unless the context requires otherwise) includes
special terms agreed in writing between the buyer and the company.
1.3 "The Buyer" means any person, firm or company to whom goods
are supplied by the company.
1.4 "The Goods" means goods, materials and accessories supplied
by the company to the buyer.
1.5 " The Contract" means any agreement for the sale of any
purchase of goods by the buyer.
1.6 "Writing" and any similar expression include facsimile transmission
and comparable means of transmission, but not electronic mail.2. Existance of contract
2.1 Any written quotation or estimate issued by the company shall constitute
an invitation to treat. No binding contract shall be created by placing
the order by the Buyer, unless and until the company has A, Agreed to
the dimension and specification of a purpose made product. B, The company
has dispatched the goods (Standard products). These conditions shall apply
to all contract to the exclusion of all other terms and conditions including
any terms or conditions which the buyer may purport to apply under any
purchase order or similar document. All orders for goods shall be deemed
to be by an offer by the buyer to purchase goods pursuant to these conditions.
Acceptance of delivery of the goods shall be deemed conclusive evidence
of the buyers acceptance of these conditions and the goods.
2.2 No particulars contained in any advertising matter, catalogues or
other publications supplied by the company ( including references to weights,
dimensions, or performance therein), nor any verbal representation by
any employee or agent of the company shall form part of the contract nor
shall they be treated as constituting a representation on the part of
the company, but nothing in these conditions affects the liability of
either party for fraudulent misrepresentation.3. Amendments and
cancellation
3.1 No amendments to these conditions shall be binding on the company
unless accepted in writing by a Director of the company.
3.2 The contract may not be cancelled by the buyer except with written
consent of the company.
3.3 In respect to the purpose made products produced by or for the company
the contract cannot be cancelled.4. Minimum Order
Values
Where the buyer orders less than the minimum order value as notified from
time to time by the company the company will apply minimum order surcharge
to what the company sees fit to be suitable to the goods/quantity ordered.5. Prices
All prices are exclusive of VAT or any other sales tax and subject to
variation by the company without notice, and goods will be invoiced at
prices ruling at the date of dispatch from the company's premises.6. Settlement Terms
Unless otherwise agreed in writing by a director of the company the price
of the goods shall be paid nett in cash or cleared funds at the point
of order.
7. Terms of despatch and delivery
7.1 Goods will be supplied and delivery of the goods shall take place
at the buyers premises or delivery site as indicated in the buyers order.
7.2 Times or dates quoted by the company for delivery of goods are intended
as estimates only and time is not of the essence or the contract.
7.3 The company shall not be liable in any way for any direct or indirect
loss, damage or expenses (including but not limited to loss of profits
and liability to third parties) suffered or incurred by the buyer as a
consequence of any delay in delivery.
7.4 The company reserves the right to deliver the goods by instalments
in any sequence. Where goods are delivered in instalments the contract
shall become severable and each instalment shall be deemed to be a separate
contract (this does not apply to purpose made products). No default or
failure by the company in respect to one or any more instalments shall
entitle the buyer to treat the contract as repudiated or to damages.8. Force Majeure
The company shall not be liable for failure to deliver the goods for any
reason whatsoever outside the reasonable control of the company including,
without limitation to the generality of the forgoing, Industrial action,
war, storm, fire, explosion, flood, governmental action or regulation,
act of God, riots, strikes, lock-outs or non availability of stocks or
materials. Any such failure shall not affect the obligation of the buyer
to pay for the goods already ordered to a purpose made specification.9. Property and Risk
9.1 Risk or loss of or damage to the goods shall pass onto the buyer on
delivery.
9.2 Property and ownership in the goods shall, notwithstanding delivery
of the goods to the buyer, not pass from the company until (a) the buyer
shall have paid the company in full there for pursuant of these conditions
and (b) no other sums are outstanding from the buyer to the company on
any account whatever whether or not such sums have become due for payment.
9.3 The buyer shall, while property in the goods remains with the company
pursuant to this condition 9, hold the goods on a fiduciary basis only
and as bailee only for the company the buyer shall store the goods without
charge to the company separately from its own goods or those of any other
person in good condition and marked in such a way that they are left clearly
identifiable as the property of the company and shall insure the goods
to there full value against "all risks" but the buyer may re-sell
goods in the ordinary course of its business.
9.4 In the event that the company is entitled to exercise any of its rights
under condition 12, the buyer shall immediately place any of the goods
the property and ownership in which remains vested in the company in its
possession or under its control at the disposal of the company and the
company shall (without prejudice to any of its other rights and remedies)
have the right to re-possess, re-sell and use such goods and may by itself,
its servants or agents enter upon any land or building, vehicle or vessel
or other place upon or in which such goods are reasonably thought to be
situated for the purpose of removing any such goods.10 Claims for Defects,
Damage, Loss or Non-Delivery
10.1 The buyer shall inspect the goods on delivery and shall within 24
hours notify the company of any alleged defect, shortage in quantity,
damage or failure to comply with the description of the sample. In relation
to any defect that is not apparent on reasonable inspection, the buyer
shall notify the company of the defect within a reasonable time after
discovery of the defect. The buyer shall give the company an opportunity
to inspect such goods at the buyers premises or delivery site within a
reasonable time following such notice and before any use is made of them.
10.2 The buyer shall notify the company of any non delivery of a whole
consignment within 5 days of the date of despatch was notified from the
company unless a longer delivery time was stated at the time of despatch.
10.3 If the buyer shall fail to comply with the forgoing, the goods shall
be conclusively presumed to be in accordance with the contract and free
from any defect or damage which would be apparent on a reasonable examination
of the goods and the buyer shall be deemed to have accepted the goods.
If the buyer establishes to the company's reasonable satisfaction that
the goods are not in accordance with the contract or are defective, the
buyers sole remedy shall be limited, as the company may elect, to making
good any shortage, to repairing or replacing such goods free of charge
or refunding all, or part of, the contract price against return of the
goods.
10.4 The company's liability to the buyer whether for any breach of the
contract or otherwise shall not in any event exceed the contract price
and the company shall be under no liability for any special consequential
or indirect loss or damage suffered (including but not limited to loss
and profits) or liability to third parties, by the buyer.
10.5 The company shall be under no liability in respect of any defect
in the goods:
10.51 if the price for the goods has not been paid in full
10.52 in respect of any defect arising from fair wear and tear, wilful
damage, negligence, abnormal working conditions, failure to follow installation
instructions, installation methods not approved by the company, misuse
or alteration or repair of the goods without approval of the company in
writing.
10.6 Subject to the provisions of this condition 10, all warranties and
conditions whether implied or otherwise are hereby excluded PROVIDED THAT
nothing herein shall restrict or exclude liability for death or personal
injury caused by the negligence of the company or affect the statutory
right of a buyer dealing as a consumer (as defined in section 12 of the
unfair contract terms act 1977)11. Compliance with
Statute
The buyer shall be responsible for ensuring that its use of the goods
complies with all and any relevent statutes, statutory instruments and
regulations having the force of law and any relevant British Standards
and shall fully indemnify the company and keep it indemnified against
all costs, claims, demands, expenses and liabilities suffered or incurred
by the company as a result of any non-compliance by the buyer.12. Default by the
Buyer
If the buyer fails to make payment for the goods in accordance with condition
6 or otherwise commits a breach of the contract, or if the buyer offers
to make any arrangements with its creditors or commits an act of bankruptcy
or if any petition of bankruptcy be presented against the buyer or the
buyer is unable to pay its debt as they fall due or if being a limited
company any resolution or petition to wind up the buyer (other than for
the purpose of amalgamation or reconstruction without insolvency) shall
be passed or presented or if a receiver, administration, administrative
receiver or manager shall be appointed over the whole or any part of the
buyers business or notice of intention to appoint an administrator is
given by the buyer or its directors or by qualifying floating charge holder
or if any distress or execution shall be levied upon any of the buyers
goods or a secured lender to the buyer takes any steps to obtain possession
of the property on which it is secured or otherwise to enforce its security
all sums outstanding in respect of goods shall become payable immediately.
The company may in its absolute discretion and without prejudice to any
other rights which it may have :- (a) suspend all future deliveries of
goods to the buyer and/or terminate the contract without liability on
its part; and/or (b) exercise any of its right to condition 9.
and if the price for any goods delivered but not paid for shall become
immediately due and payable notwithstanding any previous agreement to
the contrary.13. Intellectual
Property Rights
13.1 No right or licence is granted under the contract to the buyer under
any patent, trade- mark, copyright, registered design or other intellectual
property right except the right to resell the goods.
13.2 If the goods are manufactured by the company or supplied by the company
in accordance with designs, specifications or other requirements expressly
by the buyer, the buyer warrants to the company that the manufacture or
supply of such goods by the company does not infringe the rights of any
third party, howsoever arising, and agrees to indemnify the company full
against any liability which may arise in respect of such infringement.14. Set-off and counterclaim
The buyer shall not be entitled to withhold payment of any invoice by
reason or any right of set off or counterclaim which the buyer may have
or allege to have or for any other reason whatsoever.15. Notices
Any notice required to be served pursuant to these conditions shall be
in writing and served by first class post or facsimile or by hand on the
company at , Hortonwood 1, Telford, Shropshire, TF1 7GN or such
other address as the company may from time to time notify to the buyer
and on the buyer at the address notified to the company or in default
of notification to the address from which the goods were ordered or if
the buyer is a company at the option of the Company at the buyers registered
office. A properly addressed notice sent by first class post shall be
deemed to have been served 2 days after the date of its despatch. Any
notice given by facsimile shall be deemed to have been served twenty four
hours after despatch, in proving service by facsimile, it shall be sufficient
to show that the facsimile was despatched to the correct facsimile number.16. Servance
Any provision or term of these conditions which is or may be void or unenforceable
shall be to the extent of such invalidity or unenforceability be deemed
severable and shall not affect any other provision hereof.17. Waiver
No waiver or forbearance by the company, whether expressed or implied,
in enforcing any of its rights shall prejudice its right to do so in the
future.18. Assignment
The buyer may not assign, subcontract or in any way dispose of its right
or obligations under the contract without the prior written consent of
the Company.19. Law and Jurisdiction
These conditions and the contract shall be governed in all respects by
the laws of England and any dispute hereunder shall be subject to the
exclusive jurisdiction of the English courts.
20. Third Party Rights
A person who is not a party to these conditions has no rights under the
Contracts (Rights of Third Parties) Act 1999 to enforce or enjoy the benefit
of any of these conditions.21. Defects
The company cannot cover against natural timber defects this includes
colour variations in the timber, any level of deformation or shrinkage
deemed to be normal by the company or its suppliers, knot content, shakes
(natural splits) in the timber. See section 23 on Acclimatisation. Defects
must be notified of prior to the items being cut or fitted in any way.
The buyer must write on the delivery note or refuse the goods at the time
of delivery any damage to the packaging and inspect these goods immediately,
otherwise if any of the damage or defects on the goods is deemed to be
damage caused by force or impact the damage on the goods will be classed
as wilful damage as the goods are inspected for this in packaging. All
transport costs are to be paid by the buyer
.22. Returns policy
The company cannot refund or take return of any Purpose-made product if
the product is manufactured to the quality it is intended to be by the
company and the dimensions are as agreed to that prior to the manufacture,
if the goods are not to the correct specification the company has the
right to replace the goods offer a discount on the goods acceptable to
the company or to credit the value of the goods. Purpose made products
are still manufactured using standard details these details cannot be
changed by the buyer only by written confirmation of these changes by
the company prior to manufacture.
In respect to standard goods that the buyer as left over in respect to
the volume of there original order, the buyer must return the goods to
the company in their original packaging and in a condition suitable for
resale, these goods are subject to a restocking charge of 25%.The company
limits the return or these goods to a time of 28 days from the date of
despatch from the company.
The company does not offer a refund policy relating to the return of goods
where the customer has changed their mind about wanting the goods (please
visit the trading standards web site in respect of this statement).
As the goods sold by the company are targeted mainly to the trade the
buyer is asked take great care to order the correct goods.
23. Acclimatisation
Important - You should note that acclimatising timber products by leaving
in the room or a room with a similar humidity for at least 24 hours is
essential if problems associated with shrinkage or expansion are to be
avoided. Storing staircases or stair balustrading , for example, in a
cold and damp garage for months and then using for immediate internal
installation is not good trade practice. This is due to timber being a
natural material that both absorbs and loses moisture. The rule of thumb
to remember is 'timber plus water/moisture equals expansion' and 'timber
plus heat equals shrinkage'. It is therefore extremely important to seal/finish
your timber products once installed by painting, staining or varnishing.